Skip to content
Veteran-Owned & Operated – Free Shipping on Orders over $100
Veteran-Owned & Operated – Free Shipping on Orders over $100

MDF-500® Endless Applications

MDF-500® can be deployed across a wide range of environments large too small. It can quickly rid large spaces of pathogens such as hospitals, prisons, hotels, and schools effectively treating up to 5,000 to 8,000 square feet of space per two-gallon Part A & B mixture. MDF-500® can also be applied to smaller spaces and environments like patrol cars, ambulances, firetrucks, crime scenes, and meth lap clean-up. The product is safe to apply to all surfaces including electrical equipment.

MDF-500® is easy to apply: Fogged into large, hard-to-reach, or sensitive areas for maximum coverage, sprayed onto any smooth non-porous surfaces, Mopped on walking surfaces, Added to carpet cleaning machines, Liquid mixed for grey or black water decontamination, Mixed for commercial cleaning

Athletic facilities
Border patrol facilities
Building exterior cleaning
Building interior cleaning
Carpet cleaning
Commercial laundries
Correctional facilities
Crime scene cleaning
Cruise ships

Daycare centers
Fire or Smoke damage and
Gyms & Sports facilities
Hospitals and medical centers
HVAC system cleaning
Meth lab clean-up
Mold & mildew remediation
Nursing homes
Odor mitigation
Recreational facilities

Roof cleaning
Schools and institutions
Senior care facilities
Trains and buses
Trauma centers
TSA facilities
Veterinary clinics
Virucidal applications
Water and sewer damage

How does it work?

2-Step Remediation with 1 Application:

  1. Quaternary amines penetrate the cell wall
  2. Hydrogen peroxide then oxidizes critical cell substance

Faster Turnaround Time with Less Labor

  • Returns clients to home and employees to work quicker without the time-consuming wipe down
  • Zero Concerns of Long-Term Corrosive Effects of Conventional Disinfectants

MDF-500® is a two-part solution that does not require dilution.* Combine equal parts of A and B and gently stir for 10-15 seconds. The solution is active for 8 hours.

  • To activate MDF-500®, mix equal amounts of Part A and Part B.
  • A two gallon mixture treats 5,000 – 8,000 square feet, depending on the concentration.
  • Always wear appropriate personal protective equipment (PPE) for the application environment
  • * Product may be diluted for lighter applications. DO NOT DILUTE when treating mold or when independent testing is required.

General Application Procedures

Mixing: Mix solution as necessary for area to be treated. Mixed solution should be used within 8 Hrs. Mix equal parts of A and B. Product may be mixed in application container.

Application Equipment: ULV Cold Sprayer(mist), Standard Pump Sprayer, Commercial Foamers and Airless Spray Equipment may be considered. Product may also be used as general wipe down and cleaner.

  • Atomize or “(ULV)” Cold Mist Spray/Fog/Foam the entire contaminated area.
  • Make sure the nozzle is adjusted to the proper volume of mist droplets (Micron rate recommendation for MDF-500® is a Micron rate of 20).
  • The ideal dispersion rate ensures treated surfaces are dampened by MDF-500®, but not to the point of run-off or over-saturation.
  • Where necessary, a denser, “wetter” (Micron level 10-15 for MDF-500®) spray/fog/foam may be necessary for dense areas of mold contamination.
  • MDF-500® is an excellent germicide (hospital grade) and odor remover.
  • MDF-500® is an excellent commercial laundry cleaning agent in a 15:1 dilution.
  • MDF-500® is an excellent carpet cleaning agent at a 20:1 dilution.
  • MDF-500® can treat both contaminated grey and black water (foam application) at 10:1.

Technical Document Downloads