Skip to content
Veteran-Owned & Operated – Free Shipping on Orders over $100
Veteran-Owned & Operated – Free Shipping over $100
FAQ Request a Quote
Kemp USA Three Piece Hook & Loop Spineboard Straps
Kemp USA Three Piece Hook & Loop Spineboard Straps
Kemp USA Three Piece Hook & Loop Spineboard Straps
Kemp USA Three Piece Hook & Loop Spineboard Straps

Kemp USA 3-Piece Hook & Loop Spineboard Strap Set 2-Pack – 2 Sets, 6 Straps

by Kemp USA
$71.90 - $71.90
$71.90
$71.90 - $71.90
$71.90
SKU 10-305-ORG
Availability:
in stock, ready to be shipped

Two Sets, Six Straps, Buckle-Free Speed

In rapid extraction, fumbling with buckles costs seconds. The Kemp USA Three-Piece Hook and Loop Spineboard Straps offer a streamlined alternative to buckle systems. Each strap carries a high-strength fast-stick hook and loop lining running the length of the ends. To secure a patient, loop the strap through the board handle and press it down onto itself. It forms an instant, solid bond that will not slip during transport and rips open the moment you reach the ER. This listing ships two complete sets, six straps in total.

Each 3-piece set provides the standard points of securement, chest, hips, and legs, required for effective spinal immobilization. The universal design fits any spineboard with handholds.

Pack Configuration

Each pack contains two complete three-strap sets, six individual straps. One set outfits one board.

Key Features

  • Fast-Stick Closure: Heavy-duty hook and loop allows infinite adjustability and rapid application. No threading buckles, no clicking clips. Pull tight and stick.
  • Complete 3-Piece Set: Each set covers upper, middle, and lower body right out of the box.
  • Universal Compatibility: The flexible nylon loops easily through the handholds or around the pins of any standard backboard.
  • Durable Nylon Webbing: Rugged 2-inch wide nylon withstands tension, abrasion, and exposure to the elements.
  • No Metal or Hard Plastic: With no bulky metal buckles, the straps avoid creating imaging artifacts during X-ray or pressure points against the patient.
  • Two Sets Per Pack: Outfits two boards, or one board with a full spare set staged.

Why It Matters

Hook and loop straps are favored in high-volume EMS systems and lifeguard agencies because they are intuitive. There are no moving parts to break, no metal to rust, and they adjust fast even through thick extrication gloves. Two sets means a contaminated set can come out of service without the board going with it.

Technical Overview

Length: 72". Width: 2". Mechanism: hook and loop. Quantity: 2 sets, 6 straps.

  • Paramedic, Buckle-Free Speed: the hook-and-loop straps press onto themselves for instant securement with gloved hands.
  • Lifeguard Agency, Full-Body Coverage: each three-strap set secures chest, hips, and legs out of the box.
  • EMS Crew, No-Metal Immobilization: the strap set avoids buckles that create imaging artifacts or pressure points.
  • Supply Officer, Spare Set Staging: the two-set pack keeps a contaminated set from taking a board out of service.
  • Rescue Team, Universal Fit: the nylon straps loop through the handholds of any standard backboard.
  • Sets Per Pack: 2 (6 straps total)
  • Dimensions (per strap): 72" L x 2" W (183cm x 5cm)
  • Weight (per set): 1 lb
  • Material: Heavy-Duty Nylon Webbing
  • Closure: Full-Length Hook & Loop
  • Hardware: None (no metal or hard plastic)
📖 Official Resource
Step-by-Step Field Manual
Learn how to properly deploy and stage this equipment in a crisis.

Frequently Asked Questions

How many straps come in a pack?▸

Each pack contains two complete three-strap sets, six individual straps in total. One set outfits one board with chest, hip, and leg securement. Two sets lets an agency equip two boards, or keep one board strapped with a full spare set staged, which matters because a contaminated set otherwise takes the board out of service until it is replaced.

Why hook and loop instead of buckles?▸

The fast-stick hook and loop lining allows rapid patient immobilization where seconds matter. Rather than threading and adjusting a buckle, the strap loops through the board handle and presses onto itself, which enables one-handed application and removal while holding secure through transport. There are no moving parts to break and no metal to rust, and the straps adjust easily even through thick extrication gloves.

Will these straps fit my existing backboard or rescue stretcher?▸

Yes. The straps are compatible with standard spineboards and rescue stretchers with handholds, regardless of manufacturer. At 72 inches long and 2 inches wide they secure patients of varying sizes, and the flexible nylon loops through handholds or around pins. Whether the board is a Ferno, Junkin, Kemp, or another make, the straps integrate into existing patient transfer equipment.

How does a three-strap set improve immobilization over a two-strap approach?▸

A three-strap configuration distributes restraint across the chest, hips, and legs rather than two points. That limits patient movement during transport while spreading load to reduce pressure points that cause discomfort. For crews handling trauma patients, three points of securement help maintain spinal alignment through the full transfer from scene to ambulance to hospital.

Do the straps hold up to repeated use in demanding environments?▸

Yes. The heavy-duty nylon webbing is built for the conditions first responders and rescue teams work in. The fast-stick lining retains grip strength through repeated applications and removals, and at 1 lb per three-strap set the design stays light without giving up durability. The straps perform through vehicle extrications, wilderness rescues, and routine patient transfers, and they roll compactly for storage without tangling.