Skip to content
Veteran-Owned & Operated – Free Shipping on Orders $100 or more.
Veteran-Owned & Operated – Free Shipping $100 or more.
How to Guides - Product Field Manual SOPs - Luminary Global

Operational Field Manual: R&B Regulator-Attached SCBA Mask Bag (Model 426)

Category: Gas Mask & Respirator Accessories

Difficulty Level: Tier 4: Professional or Advanced Training Required

Complete Field Manual - FREE

Download the official step-by-step PDF guide.

📥 Download PDF Guide

Written by: Valerie Ellis Lavin

Quick Overview

The R&B Fabrications Air Mask Bag for Attached Regulator is a Cordura nylon bag made to hold your SCBA mask while leaving it attached to the regulator, and it hangs by an included spring snap. The mask and regulator are not included.

The bag is made of Cordura nylon in red or yellow, and both colors use the same material. It hangs from a hanging point by a spring snap, which comes with the bag. The mask does not have to come off the regulator to go into the bag. The bag ships empty, with no mask or regulator, and it is made in the USA from American-sourced materials.

The Air Mask Bag for Attached Regulator measures 14" L x 10" W x 4" D and weighs 5 oz. It comes in one size, in red, SKU 426RD, or yellow, SKU 426YL. The shell is Cordura nylon, and a spring snap for hanging is included with each bag.

Hang the bag where your crew can reach it, and inspect the nylon and the spring snap at each equipment check. Clean, inspect and store the mask itself by following the manufacturer's instructions and your department's procedures.

Field Application Steps

1. INSPECT ON ARRIVAL: Unpack the bag and check the Cordura nylon and the spring snap for damage. The bag ships empty: the SCBA mask and regulator are not included.

2. CHOOSE A HANGING POINT: Pick a fixed hanging point where the spring snap can clip on and the bag hangs clear of doors and controls, following your department's procedures for stowing equipment on the apparatus.

3. ASSIGN THE COLORS: If your department uses both colors, assign red or yellow by unit, riding position or crew so members can tell the bags apart at a glance.

4. PREPARE THE MASK: Clean, inspect and prepare your SCBA mask and regulator by following the manufacturer's instructions and your department's procedures before the mask goes into the bag.

5. BAG THE MASK: Place the SCBA mask in the bag with the regulator still attached. The mask does not have to come off the regulator to go into the bag.

6. HANG THE BAG: Clip the spring snap to the hanging point you chose, and confirm the bag hangs steady with the mask inside and clear of other equipment.

7. REMOVE FOR USE: When the mask is needed, take it out of the bag with the regulator attached. Use it by following the manufacturer's instructions and your department's procedures.

8. CLEAN AND REHANG: After use, wipe the bag clean and let it dry as your department's procedures direct. Check the nylon and the spring snap, then return the bag to its hanging point.

R&B Air Mask Bag for Attached Regulator – Cordura, Spring Snap Hanger

Equip Yourself: R&B Air Mask Bag for Attached Regulator – Cordura, Spring Snap Hanger

Ensure you have the right gear before an emergency strikes.

View Product
LEGAL DISCLAIMER & SAFETY WARNING:
The information provided in this Luminary Global Field Manual is strictly for educational and informational purposes. It is not a substitute for formal medical, tactical, or professional training. In the event of a medical emergency, immediately seek professional help or contact emergency services. Luminary Global assumes no liability for the misuse of equipment, improper application of techniques, or any injuries/damages resulting from the use of these guidelines. Always rely on your official agency training, local laws, and established protocols during a crisis.