SOP Field Manual: First Aid Only Large Empty Bleeding Control Cabinet

How to Guides - Product Field Manual SOPs - Luminary Global

SOP Field Manual: First Aid Only Large Empty Bleeding Control Cabinet

Category: First Aid Kits

Difficulty Level: Tier 2: Basic Preparedness Skills

Complete Field Manual - FREE

Download the official step-by-step PDF guide.

📥 Download PDF Guide

Written by: Valerie Ellis Lavin

Quick Overview

A bleeding control cabinet is a permanently wall-mounted, secure enclosure used by facility safety personnel to house and protect public access bleeding control kits, ensuring life-saving supplies remain organized, protected, and immediately retrievable during a critical incident.

The First Aid Only Large Empty Bleeding Control Cabinet, available in SKUs 91541 and 91542, is designed for deployment in high-traffic public and private facilities including corporate offices, educational institutions, transportation hubs, and public venues. The cabinet provides a centralized, clearly identified station that standardizes kit location and reduces response time when seconds determine outcomes. Its metal body shields contents from dust, moisture, and incidental impact, while a non-locking door latch allows tool-free access under emergency conditions. SKU 91542 adds a battery-powered audible door alarm that alerts personnel upon access and deters unauthorized tampering.

Proper deployment requires three sequential phases: site selection and structural mounting, stocking and configuration, and readiness sustainment through recurring inspection. The cabinet supports two loadout configurations: one large multiple-victim tote bag or up to four individual fabric pouch bleeding control kits. Mounting must be secured to a load-bearing structural member using hardware appropriate to the wall type, as direct drywall mounting without proper anchoring is prohibited.

Ongoing readiness requires monthly inspections at minimum, with immediate post-incident inspection following any cabinet access. Every inspection, battery change, and deployment event must be documented with date, time, action taken, and personnel signature. The purchasing organization bears full responsibility for selecting, stocking, and maintaining the medical supplies stored within the cabinet.

Field Application Steps

1. CONDUCT LOCATION SURVEY: Identify a permanent installation site that is highly visible, well-lit, and unobstructed, positioned along a primary path of travel or near a high-risk area. Verify the site complies with all applicable ADA guidelines for wall protrusions.

2. PERFORM STRUCTURAL ASSESSMENT: Use a stud finder or equivalent tool to locate a structural wall member such as a wood stud, metal stud, or concrete block. Account for the cabinet's weight of approximately 15 lbs empty, which will increase once stocked.

3. MOUNT THE CABINET: Secure the cabinet to the structural member using hardware appropriate to the wall type: lag bolts for wood studs, toggle bolts for hollow walls with blocking, and concrete anchors for masonry. Use a level to confirm the cabinet is plumb and verify there is no movement once installed.

4. SELECT A LOADOUT CONFIGURATION: Choose one of two configurations based on your facility's operational requirements. Configuration A houses one large multiple-victim tote bag such as First Aid Only SKU 91539. Configuration B houses up to four individual fabric pouch bleeding control kits.

5. PLACE EQUIPMENT IN CABINET: Load the selected kits into the cabinet oriented for rapid identification and retrieval. Confirm the kits do not interfere with the door's closing mechanism.

6. ACTIVATE THE ALARM SYSTEM (SKU 91542 ONLY): Install the required battery into the alarm module. Open the door to confirm the alarm sounds, then close the door to confirm it silences. Document the battery installation date for maintenance tracking.

7. CONDUCT INITIAL READINESS INSPECTION: Verify cabinet integrity, confirm the door swings freely and latches securely, and check that all contents are properly seated. Confirm tamper seals are intact if present on any stored kits.

8. EXECUTE EMERGENCY ACCESS WHEN REQUIRED: In a crisis, locate the station, grasp the door, and pull it open decisively. If the cabinet is SKU 91542, anticipate the audible alarm activating upon opening.

9. RETRIEVE KITS AND RENDER AID: Remove the necessary kit or kits from the cabinet and proceed to the point of injury. Utilize the kit contents in accordance with your level of training and your organization's protocols.

10. REPORT USE AND INITIATE RESTOCKING: Immediately after the event, report cabinet access to the designated safety officer or department. The station must be treated as non-operational until it has been fully inventoried and resupplied.

11. MAINTAIN RECURRING INSPECTION CYCLE: Inspect the cabinet at minimum monthly and immediately following any incident where the cabinet was accessed. At each inspection, check cabinet integrity, door and latch operation, contents inventory, supply expiration dates, and alarm function for SKU 91542. Replace the alarm battery annually regardless of apparent function.

12. MAINTAIN DOCUMENTATION LOG: Record every inspection, maintenance action, battery change, and deployment in a log sheet kept inside the cabinet door or at a nearby security station. Each entry must include the date, time, action taken, and personnel signature.

Equip Yourself: First Aid Only Large Empty Bleeding Control Cabinet

Ensure you have the right gear before an emergency strikes.

View Product

LEGAL DISCLAIMER & SAFETY WARNING:
The information provided in this Luminary Global Field Manual is strictly for educational and informational purposes. It is not a substitute for formal medical, tactical, or professional training. In the event of a medical emergency, immediately seek professional help or contact emergency services. Luminary Global assumes no liability for the misuse of equipment, improper application of techniques, or any injuries/damages resulting from the use of these guidelines. Always rely on your official agency training, local laws, and established protocols during a crisis.